Rear Projection Film Adhesive
Rear Projection Film adhesive is much like a window tint adhesive and apply in similar ways. There is one thing most important to remember about working with Rear Projection Film Adhesives.
That is that you should not ever just use plain water to install your rear projection film. The right Application liquid and squeegee will ensure a proper installation and removal of all the application fluid and air from under your rear projection film.
You can find the proper application fluid, spray bottle and squeegee for your rear projection film installation here: Rear Projection Film Installation Kit
In many cases it is best to have a second set of hands, the rear projection film adhesive is very sticky. If the film gets stuck to the liner when being removed or stuck to glass without liquid it will not come off easy or in usable condition.
Depending on the size of the piece of rear projection film and quantity you have to install, you will want to prepare enough liquid without having to refill. You can order additional fluid refills based on the size of your project.
What you can expect:
Installing rear projection film is typically a learning process your first time. If you are wondering if you can get all the bubbles out – yes you can. Follow our directions and use our tools for best results.
You will have some time to work with your film should you use the right application fluid, this will give you time to position the film placement.