Take the technology inside our rigid rear projection screen products and compress it into a film version and you get Rear Projection Screen Films. Apply these rear projection screen films to any glass or acrylic surface.
Rigid rear projection screens were at one time the staple of digital store front window displays for years. However the cost to pack and ship the heavy and bulky rigid screens was expensive. This because each screen must be crated and shipped via freight for most standard sizes.
Rear Projection Film Screens are able to be rolled and shipped in tubes or boxes and even full rolls of 60”x33’ or more can be shipped with standard shipping companies for cost effective worldwide delivery.
Using a Rear Projection Screen film on glass or acrylic provides the same effect as a rigid rear projection screen would but with less shipping and crating costs. Shipping a five hundred pound crate for one screen is incredibly expensive compared to a six inch box.
In addition the need of costly hanging kits for the much heavier rigid rear projection screens will not be needed. Rear projection films apply directly to the glass with the integrated adhesive, this allows for the best possible viewing experience and least amount of inherent reflection as well.
Product Cost Savings
Benefits of rear projection screen films are also going to be good for your project budget as the projection film is much more cost effective. Project budgets go farther with rear projection film. Purchase nearly five hundred square feet of film for the cost of two sheets of rigid rear projection screens.
Both products have unique benefits of course but integrator’s using rigid projection screens in the past will likely appreciate the flexibility of rear projection screen films.
Rear Projection Film from Screen Solutions