Anti-Glare Film

From: $81.90

Anti Glare Film is placed on the outside or opposite side of the glass or acrylic than your rear projection film. The film reduces glare and reflection from the front side surface of your display, increasing brightness, widening viewing angles and giving your viewing audience a brighter and more even viewing experience.

*Note: All films are cut with a 1/16th” margin of error.

*Except in the case of manufacturer defect, all film sales are non-returnable.

Clear
SKU: N/A Category:

Description

Anti Glare Film can be used with our rear projection films,  LCD’s, Plasma, or LED screens. When using LCD, LED, or Plasma displays, the displays need to be as close as possible to the backside of the film for best results.

AG Film applies much like our rear projection films do. Pulling the release layer off the back of your film exposes the built-in hi-tac adhesives that will keep it affixed to your glass or acrylic surface for years to come.

Anti Glare Film should not be applied with regular water, and use of a professional installer or our Application Kit is recommended for best results. Fluid is your friend, and should be used vigorously during the application process.

*Note: Anti Glare Film is not recommended for use with displays in high ambient light with a display brightness of less than 500 nits. The display may not be bright enough to have viewable images regardless of Anti Glare Film being used in this setup.

Specifications

Light Transmittance ± 92%
Haze ± 4.5 – 7%
Thickness 0.075mm
Anti-Glare Standard Roll Size 49 in. x 33 ft.*

*Custom cut sizes are available. Call 1-888-631-5880 for details.

Size Chart

Our film is listed by its diagonal size according to a 16:9 aspect ratio. For specific measurements, please view the information below.

35″ = 17 x 31″ 42″ = 21 x 37″ 46″ = 23 x 40″ 50″ = 25 x 44″ 60″ = 29 x 52″ 65″ = 32 x 57″
67″ = 33 x 58″ 80″ = 39 x 70″ 84″ = 41 x 73″ 92″ = 45 x 80″ 100″ = 49 x 87″