Touch Foil

Through-Glass Innovation.

Now you can turn any standard piece of glass into an interactive touch screen. Interactive touch foils are made up of a clear polymer material with a micro-wire sensor grid. These sensors use capacitive technology to accurately track up to 40 points of input via your body's electric signal. Best of all, this technology is powerful enough to operate normally through the application surface.

The installation process is similar to that of a window tint material, and allows for both temporary and permanent usage options. Each touch foil connects to a computer or digital signage controller using a standard USB cable. Operating through-glass or acrylic keeps all its components situated safely behind the viewing surface. Touch foils let you use your finger as a mouse for pinch, drag, swipe, zoom, and other basic touch gesture commands without any hassle.

SSI Accent Rigid

See it in action!

Technical Specs

Size Ranges per Aspect Ratio (16:9) 30"-116" Diagonal*
Number of Touch Sensors (Resolution) ~2,000-8,000
Customizable Features Size, Tail Length, Tail Position, Active Area, & Cut Size
Standard Configuration with non-conductive, single construction glass 20mm thick inclusive of glass and air gap
Response Speed Typically 18 - 50 ms
Operating Temperature Range -10°C (14°F) to 70°C (158°F)
Humidity Range 0% - 95%
Light Transmission Typically better than 93%

*Custom roll lengths are available. Call 1-888-631-5880 for details.