Touch Specifications

Direction Method: Projected Capacitance technology using horizontal vertical wires.

Screen Sizes: 30″-96″ 4:3 ratio and 30″-116″ 16:9 ratio as standard, other sizes available upon request.

Fixing Options: Removable/re-useable, Removable (with no residue) and permanent options available.

Position Accuracy: Approximately 3mm absolute, 1mm relative, No drift.

Alignment: Software drivers provide a calibration facility.

Touch: Single touch (Dual Touch Available) and touch/drag function. Can also be used with gloved hands.

Sensitivity: Can be programmed for different thickness of glass. Standard configuration functions with non-metalized. Single construction

glass 16mm thick. Double glazing option up to 25mm available.*

Speed of Response: Depends upon material thickness. Typically 50 to 100ms

Output: USB 2.0 HID Device A Male to Male Mini B, RS232 communications to a 9 pin D female, USB via a USB to RS232 convertor.

Software Compatibility: Drivers are available for Windows Operating Systems & Linux

Temperature Range: Better than -10 to +70 Celsius

Humidity Controller:0% to 95% Unaffected by condensation

Light Transmission: Typically better than 93%

EMC EN555022:1998 + A1 + A2 EN55024:1998 + A1 + A2 This device compiles with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

*Double Glazing Option: In this mode we recommend only touch not the touch and drag function. The drag functionality is limited due to the reduction of the scan rate to achieve the touch function through thicker materials due to variation in double construction glass. We recommend testing with a foil during the survey of each individual site since it is impossible to guarantee the foil will function in all cases.